Getting started with Microsoft ISA Server 2006, Part I: Installation
ISA, Security, Windows December 28th, 2007Introduction
![]() |
Microsoft Internet Security & Acceleration Server 2006 is a firewall and proxy product from Microsoft. It can protects local network from hackers, limit access for internet access, improve internet speed for users and also logging any connections that pass through ISA Server. |
Or you can say that ISA Server is a gateway between intranet(LAN) and internet so it has more than one network interfaces usually it has 2 or 3 network interfaces depends on network topology(Edge firewall, 3-Leg Perimeter, etc.) in your organization.
The series are divided into 5 parts:
- Getting started with Microsoft ISA Server 2006, Part I: Installation
- Getting started with Microsoft ISA Server 2006, Part II: Configure Network Topology
- Getting started with Microsoft ISA Server 2006, Part III: Create Firewall Policy Rule
- Getting started with Microsoft ISA Server 2006, Part IV: Configure Client Type
- Getting started with Microsoft ISA Server 2006, Part V: Configure HTTP Filter
This post will show how to install ISA Server 2006 Standard Edition on a Windows 2003 Server which has 2 network interfaces: one is connected to internal network(LAN) and the other connected to external(Internet). The diagram is as below:

Step-by-step
- Open ISA setup program.

- Click Next.

- Enter your license information. Click Next.

- Select Setup Type. If you want to customize features or change installed directory, select Custom. Otherwise, select Typical. I leave Typical for convenience.

- On Internal Network, you must enter your internal IP address range. You can do this by adding manually or select from network adapter. Before click Next, ensure that your network addressed was configured correctly.

- On Firewall Client Connections, if you haven’t upgrade from previous ISA Server(ISA 2000 or 2004), leave the check box uncheck and click Next. Otherwise, check the check box before continue.

- On Service Warning, click Next. Notice that some of services will be restarted or disabled while installing.

- Click Install.

- Wait for install finishes.

- You can check “Invoke ISA Server Management when the wizard closes” if you want to configure ISA now.

- Now you have finished installing ISA Server 2006. For configure the ISA details, continue on the next part.

Related post
- Getting started with Microsoft ISA Server 2006, Part 3: Installation This article is one of the series of Getting started with Microsoft ISA Server 2006. You can see the index...
- Getting started with Microsoft ISA Server 2006, Part II: Configure Network Topology Network Topology From Part I, you have finished install ISA Server 2006. Before using the server, you need to do...
- Getting started with Microsoft ISA Server 2006, Part 5: Network Layout Concept This article is one of the series of Getting started with Microsoft ISA Server 2006. You can see the index...
Related posts:





July 29th, 2008 at 3:12 pm
Dear Linglom.com Team,
your web site is so nice and informatics that i never seen before it. Keep it up it really nice work you people have done.
thanks
Qazzafi,
System and Network Administrator,
Govt. of Punjab, Pakistan.
September 10th, 2008 at 4:59 pm
[...] http://www.linglom.com/2007/12/28/getting-started-with-microsoft-isa-server-2006-part-i-installation... This entry was posted on Wednesday, September 10th, 2008 at 2:24 am and is filed under Proxy Server. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site. [...]
October 29th, 2008 at 8:34 pm
Another good work,keeps hitting the nail on the head…
People who like day by day knowledages can find them here ,those who wants to build a new network fro scratch will find useful things here but experience is a must.
Sam
Montreal,Quebec
Sys Admin.
October 30th, 2008 at 7:51 pm
this tutorials is very explicit but it doesnt cover enterprise edition
thanks
November 27th, 2008 at 11:04 pm
Thanks for Sharing info . this is so helpfull for me
January 24th, 2009 at 6:53 pm
How do i setup the network card that connected to external(Internet). My Internet connection through a router to local ISP with IP address like 60.25.115.23.
January 24th, 2009 at 6:55 pm
Your advice is will be highly appreciated. Reagrds
January 27th, 2009 at 10:08 pm
Hi, Kumaran
For external interface,
the IP Address should be in the same network as the router.
Same subnet as the router.
Gateway point to router’s IP Address.
DNS is ISP’s DNS.
April 19th, 2009 at 4:14 pm
hahaha… ive installed ISA 2006 without any prior knowledge. Now, its a long road to configuration. thanks for the headsup and tutorials!!!
May 25th, 2009 at 4:37 pm
this is a very great website
very helpful for the beginers and I have one question that I want to block some certain users and all some user and with limited browsing and one group with no limitation.
plz reply me at rashid_47010@hotmail.com
June 9th, 2009 at 5:23 pm
great site! thanks for sharing. how about if my network is like this:
lan (192.168.1.0)—>router—>isa fw—>internet
how will i configure isa?
June 18th, 2009 at 4:22 pm
Hi, Rashi
Have you see Part III: Create Firewall Policy Rule? You can create an access rule to allow or deny traffic on a certain user or group as you want.
Hi, Jcq
On the internal network,
– IP Address is in the same network as the router.
– Gateway is the router’s IP Address.
The easiest way to configure ISA Server is to think that it is a router.
January 26th, 2010 at 8:02 pm
thx yow,,,
sangat berguna,
keep it
February 3rd, 2010 at 5:43 pm
Hi Linglom,
Im so glad that you are so very kind that you want to share this kind of information. I just want to know if you know where to download an interactive tutorial of ISA Server 2006 installation and configuration?
Thanks a lot and more power to your blog.
April 17th, 2010 at 7:14 pm
Hi L,
i]ve installed isa 2006 on server 2003 standard, everything was ine during the instalation but after the installation isa bocks all traffic , no ping no internet . I cant ping isa server from client pc, before i installed isa 2006, i had internet on server since installation internet doesnt work, it only work if i stop firewall service. Can you explain me what going on?
April 18th, 2010 at 9:31 am
Hi, Killah
By default, ISA Server blocks all traffics. You need to create an access rule to allow some traffics. See the later post for detail.
May 4th, 2010 at 10:42 am
Great tutorial!!!
Just 1 question (for now)…
Can ISA 2006 be set up on a Virtual Server?
May 11th, 2010 at 10:40 am
Hi, Willy
Yes, ISA can be installed as virtual machine.
August 6th, 2010 at 4:50 pm
Hi,
A good job done…..My ISA is configure as a front-end server. I have installed ISA 2006 with Norton Antirus….but the liveupdate is not updating, i tried Mcafee 8.0i …the update is not running too
how do i allow antivirus update through the ISA 2006 server
August 19th, 2010 at 10:20 am
Hi, GentleMan
See Configure ISA for Symantec LiveUpdate.